Tube of lubricating grease 7.1 MHR grease gr.40
7615375B

Add to Cart
Description
MALOSSI 7.1 MHR GREASE
Semi-synthetic high performance grease with a lithium complex soap thickener.
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C.
Description
MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half pulley bushing resulting in extended maintenance intervals.
MALOSSI 7.1 MHR GREASE is a high performance grease which combines mineral and synthetic oils, lithium complex soap thickener and anti-corrosion, anti-rust, anti-wear, and E.P. additives. The chemical composition of this grease produces superior anti-corrosion and thermal/mechanical stress resistant properties, even at extreme operating conditions.
Specifications and Approvals
Meets or exceeds the following industry specifications :
- ISO 6743-9 L-XCCEB 2/1
- DIN 51502 KP 2/1 P –30
Features and Benefits
- Excellent protection against rust and corrosion and resistance to water wash out.
- Elevated dropping point.
- Excellent pumpability.
- Extended lubrication intervals translating into reduced operational costs.
- Compelling anti-corrosive characteristics of lubricated parts.
Typical Properties
Properties | U. M. | Values | Standard |
NLGI Grade | 2 | DIN 51818 | |
Texture | Smooth, Buttery | Visual | |
Colour | Light brown | Visual | |
Penetration-worked | mm/10 |
280 / 310 |
DIN ISO 2137 |
Dropping Point | °C | > 250 | IP 396 / 93 |
Steel corrosion protection (EMCOR Test /3% NaCl) | Grade |
0 - 0 2 - 2 |
DIN 51802 |
Copper corrosion protection, 24 hrs @ 140°C | Grade | < 2 | DIN 51811 |
Oil separation, one week @ 40°C | % | 1 - 3 | DIN 51817 |
Water resistance @ 90°C | Grade | 1 - 90 | DIN 51807 - 1 |
Operational temperature range | °C | -30 / +160 | DIN 52825 |
Oxidation Stability | bar | < 0,5 | DIN 51808 |
Base oil type | Mineral Oil / PAO | ||
Base oil viscosity, mm2/s |
40°C 100°C |
2800 22 |
DIN 51562 - 1 |
** MALOSSI 7.1 MHR GREASE is recognizable from the BLACK cap.. **
Products reserved exclusively for competitions in places intended for them in accordance with the provisions of the competent sports authorities. We Disclaim all liability for improper use
Applies to
Tube of lubricating grease 7.1 MHR grease gr.40
Code | Description | Price | |
---|---|---|---|
5118678 | MULTIVAR 2000 MHR ALUMINUM YAMAHA / MINARELLI | € 153.41 | + |
5118058 | MULTIVAR 2000 MHR Next variator | € 222.80 | + |
5114855 |
MULTIVAR 2000 MHR Next variator
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 202.31 | + |
5118054 | MULTIVAR 2000 MHR NEXT variator | € 222.80 | + |
5118055 | MULTIVAR 2000 MHR Next variator for Yamaha T Max ie 4T LC 530 cc | € 213.17 | + |
5114192 |
MULTIVAR 2000 MHR variator
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 174.69 | + |
5115501 |
MULTIVAR 2000 MHR variator for BMW C 600 - 650 cc up to 2015
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 266.71 | + |
5117304 |
MULTIVAR 2000 MHR variator for BMW C SPORT and C GT 650 cc dal 2016
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 266.71 | + |
5116230 | MULTIVAR 2000 variator | € 247.26 | + |
5114258 |
MULTIVAR 2000 variator
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 194.53 | + |
5114260 |
MULTIVAR 2000 variator
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 194.53 | + |
5111225 | MULTIVAR 2000 variator | € 140.16 | + |
5113513 |
MULTIVAR 2000 variator
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 218.26 | + |
5114148 |
MULTIVAR 2000 variator
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 202.31 | + |
5118980 | MULTIVAR 2000 variator | € 202.31 | + |
5119126 | MULTIVAR 2000 variator | € 224.68 | + |
5119462 | MULTIVAR 2000 variator | € 210.40 | + |
5116679 | MULTIVAR 2000 variator | € 194.53 | + |
5118750 | MULTIVAR 2000 variator for BMW C 400 X - C GT 400 from 2019 | € 194.53 | + |
5114264 |
MULTIVAR 2000 variator for Kymco Xciting - Xciting R 500 cc
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 194.53 | + |
5116072 | MULTIVAR 2000 variator for Kymco XCITING ie 4T LC euro 3 400 cc | € 206.19 | + |
5114263 |
MULTIVAR 2000 variator for Suzuki Burgman AN K 7 > K 9 ie 4T LC 400 cc
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 180.95 | + |
5116277 |
MULTIVAR 2000 variator for Suzuki Burgman AN K10 > ie 4T LC 400 cc
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 180.95 | + |
5113595 |
MULTIVAR 2000 variator for Yamaha Majesty 4T LC 400 cc up to 2008
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 186.37 | + |
5117861 | MULTIVAR 2000 variator for YAMAHA X MAX 300 | € 202.31 | + |
5118238 | MULTIVAR MHR TEAM 2 ALUMINUM variator for Piaggio 2000 scooter | € 122.18 | + |
6114885 |
OVER RANGE for Yamaha T MAX ie 2004 > 2011 500 cc
ATTENTION : The grease supplied in the kit must be put in the internal groove both of the hub and of the bush |
€ 640.37 | + |
6118884 | OVER RANGE MHR ALUMINUM - YAMAHA / MINARELLI | € 495.59 | + |
6118885 | OVER RANGE MHR ALUMINUM - YAMAHA / MINARELLI | € 476.35 | + |
6119040 | OVER RANGE Piaggio complete transmission unit | € 342.47 | + |
61 8317 | TORQUE DRIVER | € 104.98 | + |
6112766 | TORQUE DRIVER | € 104.98 | + |
61 8233 | TORQUE DRIVER | € 104.98 | + |
61 9223 | TORQUE DRIVER | € 104.98 | + |
61 9730 | TORQUE DRIVER | € 97.71 | + |
6111662 | TORQUE DRIVER | € 152.47 | + |
6111763 | TORQUE DRIVER 4stroke | € 174.72 | + |
6111964 | TORQUE DRIVER 4stroke | € 194.53 | + |
6112563 | TORQUE DRIVER 4stroke | € 229.59 | + |
6111656 | TORQUE DRIVER 4stroke | € 143.84 | + |
6111658 | TORQUE DRIVER 4stroke | € 118.58 | + |
6111660 | TORQUE DRIVER 4stroke | € 143.84 | + |
6112879 | TORQUE DRIVER 4stroke | € 136.02 | + |
6113495 | TORQUE DRIVER 4stroke | € 229.59 | + |
6115289 | TORQUE DRIVER 4stroke | € 229.59 | + |
61 8312 | TORQUE DRIVER external Ø 115 mm | € 99.59 | + |
61 9100 | TORQUE DRIVER external Ø 134 mm | € 104.98 | + |
6114309 | TORQUE DRIVER MHR ALUMINUM | € 168.89 | + |
6114595 | TORQUE DRIVER MHR ALUMINUM | € 167.27 | + |