ADAPTER for TEMPERATURE SENSOR

商品編號 1518132B

ALUM-CYL. KIT Ø 50 (stroke 39,3 mm) H2O MHR BIG BORE

商品編號 3113030

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887) - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

ALUM-CYL. KIT Ø 50 (stroke 44 mm) H2O MHR BIG BORE

商品編號 3113042

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 5313270 (and 5316029 AFTER FITTING SPACER 0716345) - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

ALUM-CYL.KIT Ø 40 H2O MHR TEAM mod-head

商品編號 31 8884

For CRANKSHAFTS 53 9212 - 5316005 (53 9703 - 5314544 - 5314887) - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

ALUMIN-CYL. KIT Ø 47 pin Ø 12 H2O MHR REP

商品編號 31 8466

For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

ALUMIN-CYL. KIT Ø 47,6 pin Ø 12 H2O MHR

商品編號 31 8455

IT IS ADVISED TO USE crankshaft 53 7600 - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

ALUMIN-CYLINDER KIT Ø 47,6 H2O MHR TEAM Testa Rossa mod-head

商品編號 3115349

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 53 9212 - 5316005 - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

ALUMIN-CYLINDER KIT Ø 52 H2O MHR BIG BORE Testa Rossa mod-head

商品編號 3115385

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 5316029 - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

CAST-I-CYLINDER KIT Ø 47 pin Ø 12 H2O

商品編號 31 7353

For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

CYLINDER KIT Ø 47,6 MHR FLANGED MOUNT testa rossa

商品編號 3115901

To be assembled EXCLUSIVELY with Malossi MHR C-one ENGINE CRANKCASE 5715844 - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

CYLINDER KIT Ø 52 MHR FLANGED MOUNT testa rossa

商品編號 3115883

To be assembled EXCLUSIVELY with: ENGINE CRANKCASE 5715845 and CRANKSHAFT (stroke 44 mm) 5316029 - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

SPACER CYLINDER BASE PIAGGIO 5 mm

商品編號 0716345

TEAM FACTORY ALUM-CYL. KIT Ø 47,6 H2O 7T MHR 2 modul-head

商品編號 3115142.T0

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887) - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

TEAM FACTORY ALUM-CYL. KIT Ø 47,6 H2O 7T MHR modul-head

商品編號 3112099.T0

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 53 9212 - 5316005 (53 9703 - 5314544 - 5314887) - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

C-ONE 70cc Piaggio complete engine (wheel 12/13) - not assembled

商品編號 4917552

RC-ONE 94cc Piaggio complete engine (wheel 12/13) - not assembled

商品編號 4917550

CRANKSHAFT MHR TEAM pin Ø 12-13 rod 85 (stroke 39.3 mm)

商品編號 5316005

TO COUPLE ONLY WITH cylinder Kits 3115142 - 3115349 - 3115901

CRANKSHAFT MHR TEAM pin Ø 13 rod 90 (stroke 44 mm)

商品編號 5317822

Crankcase MODIFICATIONS: BORING - TO BE COUPLED ONLY WITH cylinder kits 3115385 - 3115883 (3113042/.T0 AFTER FITTING SPACER 0716345)

CRANKSHAFT RHQ MHR pin Ø 12 rod 85 (stroke 39.3 mm)

商品編號 53 9212

TO COUPLE ONLY WITH cylinder Kits 31 8884 - 3112099.T0 - 3113030 - 3115142.T0 - 3115349 - (31 9128 - 3112099 - 3115142 : out of prod.)

CRANKSHAFT RHQ pin Ø 12 rod 80 (stroke 39.3 mm) PIAGGIO

商品編號 53 7600

PINWHEEL SHAFT 136,9 mm (coupl. Ø 27)

商品編號 6714530

PRIMARY GEARS HTQ z 14/39 (FORCED-Ø 17)

商品編號 67 9080

PRIMARY GEARS HTQ z 15/38 (FORCED-Ø 17)

商品編號 6713339

SEC. ROLLER GEAR z 13/48 (FORCED-Ø 17)

商品編號 67 9967

SECOND.GEARS HTQ z 13/48 (FORCED-Ø 17)

商品編號 67 9966

EXHAUST SYS. SCOOTER RACING MHR TEAM 3 Ø 47,6

商品編號 3215341

TO COUPLE ONLY WITH cylinder Kits 3115142 - 3115142.T0 - 3115349 - 3115901

EXHAUST SYS. WILD LION homologated

商品編號 3216582

** NOT HOMOLOGATED FOR THIS VEHICLE ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

EXHAUST SYSTEM FLIP homologated

商品編號 3216694

** NOT HOMOLOGATED FOR THIS VEHICLE ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

EXHAUST SYSTEM SCOOTER RACING MHR BIG BORE Ø 52

商品編號 3216158

TO COUPLE ONLY WITH cylinder Kits 3115385 - 3115883

CARB.KIT PHBG 19 BD SCOOTER 50

商品編號 1611040

CARB.KIT PHBG 19 BS MHR TEAM SCOOTER 50 2t

商品編號 1611021.T

CARB.KIT PHBG 21 BD SCOOTER 50

商品編號 1610997

CARB.KIT PHBG 21 BS MHR TEAM SCOOTER 50 2t

商品編號 1613890.T0

CARB.KIT PHBH 28 MHR SCOOTER 50

商品編號 1611775

CARB.KIT PHBL 25 MHR GILERA-PIAGGIO 50

商品編號 1611009

CARB.KIT PHVB 22 DD SCOOTER 50-75

商品編號 1611029

CARB.KIT VHST 28 BS MHR for C/RC-one Malossi CRANKCASE

商品編號 1616276

ONLY for MHR C/RC-one CRANKCASE

CARB.KIT VHST 28 BS MHR TEAM for SCOOTER (PIAGGIO)

商品編號 1613766

ONLY for ORIGINAL CRANKCASE

BOLT/GASKETS KIT for MHR REPLICA/ART OF PERFORMANCE

商品編號 2012442

(spare part for Malossi exhausts sys. 3212437 - 3215167 : out of production)

X360 FKM INCLINED INT.MANIF. Ø 22-24,5 L.29 (PIAGGIO)

商品編號 2014520

Can be rotated of 360°

X360 FKM INCLINED INT.MANIF. Ø 30-35 L.29 (PIAGGIO)

商品編號 2013802

Can be rotated of 360°

X360 RACING FKM INCLINED INT.MANIF. Ø 22-28 L.29 (PIAGGIO)

商品編號 2014519

Can be rotated of 360° - for PHBG 15-21 Racing (linkage 28)

6 VL11/ORIG.VAL. CARB.f. PETALS 2 th.0,30/0,35/0,40

商品編號 27 7054.C0

for ORIGINAL VALVE

REED VALVE VL11 CARB.petal th.0,30

商品編號 27 7708.C0

REED VALVE VL13 CARB.petal th.0,30 (45°) MHR

商品編號 27 9490.C0

REED VALVE VL16 CARB.petal th.0,30 MHR TEAM

商品編號 2713719.C0

for the ASSEMBLY MODIFY the CRANKCASE

PHVA 17,5 PIAGGIO SCOOTER

商品編號 72 7084

TORSION CONTROLLER for eng. 50 cc PIAGGIO - HONDA - KYMCO - PEUGEOT- SYM

商品編號 2512828

3 BLACK RACING CLUTCH SPRINGS Ø 2,2 for DELTA/FLY CLUTCH

商品編號 29 8745B

3 RED REINFORCED CLUTCH SPRINGS Ø 2 for DELTA/FLY CLUTCH

商品編號 29 8743B

3 YELLOW RACING CLUTCH SPRINGS Ø 1,8 for DELTA/FLY CLUTCH

商品編號 29 8742B

BLACK VARIATOR ADJUSTER SPRING ext.Ø 57,8x103mm thread Ø 4mm 5,5k

商品編號 2916111.B0

for Multivar and original variator - rigidity increase compared to original spring: +114%

BLUE VARIATOR ADJUSTER SPRING ext.Ø 57,8x91mm thread Ø 4,1mm 6,1k

商品編號 29 8325.A0

for Multivar and original variator - rigidity increase compared to original spring: +106%

GREEN VARIATOR ADJUSTER SPRING ext.Ø 57,8x91mm thread Ø 3,9mm 4,9k

商品編號 29 8323.G0

for Multivar and original variator - rigidity increase compared to original spring: +60%

MHR SPRING SET DELTA/FLY CLUTCH

商品編號 29 8747

RACING SPRING SET for ORIGINAL CLUTCH

商品編號 29 7454

SPORT SPRINGS SET DELTA/FLY CLUTCH

商品編號 29 8746

VIOLET VARIATOR ADJUSTER SPRING ext.Ø 57,8x91mm thread Ø 4,0mm 5,5k

商品編號 29 8324.V0

for Multivar and original variator - rigidity increase compared to original spring: +82%

WHITE VARIATOR ADJUSTER SPRING ext.Ø 57,8x118mm thread Ø 4,0mm 3,3k

商品編號 29 8360.W0

for Multivar and original variator - rigidity increase compared to original spring: +30%

MULTIVAR 2000 HUB (Ø 20x14,8x49,5 mm)

商品編號 2311599B

Hub for original variator without limiter

VARIAT. MULTIVAR 2000 PIAGGIO SCOOTER 50

商品編號 51 9019

VARIATOR MULTIVAR MHR TEAM 2 ALUMINUM SCOOTER (PIAGGIO 2000)

商品編號 5118238

ONLY for OVER RANGE MHR ALUMINUM

VARIATOR MULTIVAR MHR TEAM 2 SCOOTER (PIAGGIO)

商品編號 5118660

ALSO for OVER RANGE

DELTA CLUTCH adjust. autom. clutch for CLUTCH BELL Ø 107

商品編號 52 7880

DELTA SYSTEM (PIAGGIO - Clutch BELL Ø 107)

商品編號 5214110

DELTA SYSTEM MHR (PIAGGIO - Clutch BELL Ø 107)

商品編號 5214738

FLY CLUTCH NOT adjust. autom. clutch for CLUTCH BELL Ø 107

商品編號 52 8797

FLY SYSTEM (PIAGGIO - Clutch BELL Ø 107)

商品編號 5214111

FIXED PULLEY MHR ALUMINUM

商品編號 6114308

ONLY for OVER RANGE MHR ALUMINUM

OVER RANGE MHR ALUMINUM - PIAGGIO 2000 (LONG CRANKCASE)

商品編號 6115781

OVER RANGE PIAGGIO (LONG CRANKCASE)

商品編號 6114219

REAR PULLEY SYSTEM

商品編號 6113101

ONLY for OVER RANGE

REAR PULLEY SYSTEM MHR ALUMINUM Ø 134 mm

商品編號 6114582

ONLY for OVER RANGE MHR ALUMINUM

TORQUE DRIVER ext. Ø 134 mm

商品編號 61 9100

TORQUE DRIVER MHR ALUMINUM

商品編號 6114309

ONLY for OVER RANGE MHR ALUMINUM

VENTILVAR 2000 half-pulley

商品編號 6115790B

ELECTRIC STARTER IS CUT OUT

6 HTRoll Ø 19x15,5 gr.07,2

商品編號 66 9420.M0

for MULTIVAR 2000

6 HTRoll Ø 19x15,5 gr.07,5

商品編號 66 9420.N0

for ORIGINAL VARIATOR

CLUTCH BELL inner Ø 107 mm WEIGHT 508 grams

商品編號 7711115

WING CLUTCH BELL inner Ø 107 mm 644 grams

商品編號 7711207

WING CLUTCH BELL inner Ø 107 mm WEIGHT 539 grams MHR (PIAGGIO)

商品編號 7714147

X K belt MHR (19x10,2x815 mm 28°)

商品編號 6115668

X SPECIAL belt (18,7x8x810 mm 30°)

商品編號 6116889

DIGITRONIC digital electronic controller 2T 50 cc. euro 4

商品編號 5518235B

SHIELDED FIXING SPARK PLUG

商品編號 5511679B

SPARK PLUG FIXING

商品編號 55 9724B

EXTRACTOR for ROTOR

商品編號 6011651

RED FILTER E13 Ø 42/50/60 inclined 25° PHBH - MIKUNI - KEIHIN

商品編號 0413527

ONLY for ORIGINAL CRANKCASE

RED FILTER E13 Ø 60 inclined 25° PHBG 15÷21-PHBL 20÷26 threaded

商品編號 0411505

RED FILTER E5 Ø 38 PHBL 20÷25 with BLACK CAP

商品編號 04 3296.C0

DOUBLE RED SPONGE for original filter

商品編號 1414497

RED SPONGE for original filter

商品編號 1411778

BRAKE PADS homologated

商品編號 6215008BB

Front ** NOT HOMOLOGATED ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

BRAKE PADS MHR

商品編號 6215008BR

Front

BRAKE PADS MHR SYNT homologated

商品編號 6215019BS

Rear ** NOT HOMOLOGATED ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

WHOOP DISC brake disc ext. Ø 190 - thickness 3,5 mm

商品編號 6212603

Front

REAR SHOCK ABSORBER RS1 - wheelbase 320 mm

商品編號 4615432

REAR SHOCK ABSORBER RS24 - wheelbase 294 mm

商品編號 46 8308

REAR SHOCK ABSORBER RS24/10-R - wheelbase 290 mm

商品編號 4614237

SPRING for Malossi REAR SHOCK ABSORBER ext.Ø 56x190mm thread Ø 6mm k 1,8

商品編號 29 9213B

Rigidy compared +30% to the Malossi shock abs. RS24/10

Malossi C/RC-One CRANKCASE MUDGUARD for wheels 12-13"

商品編號 4517008

ONLY for vehicles WITH Malossi MHR C-one/RC-one ENGINE CRANKCASE

STAND for SCOOTER

商品編號 45 8591

2 BLACK GRIPS GAS Malossi (mod. with side fastening)

商品編號 6918091.B0

2 BLACK GRIPS GAS Malossi (mod. without side fastening)

商品編號 6918092.B0

2 BLACK GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. with side fastening)

商品編號 6914575.B0

2 BLACK GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. without side fastening)

商品編號 6914574.B0

2 BLACK GRIPS with RED Malossi logo (mod. with side fastening)

商品編號 6914060.R0

2 BLACK GRIPS with RED Malossi logo (mod. without side fastening)

商品編號 6914059.R0

2 BLACK GRIPS with YELLOW Malossi logo (mod. with side fastening)

商品編號 6914060.Y0

2 BLACK GRIPS with YELLOW Malossi logo (mod. without side fastening)

商品編號 6914059.Y0

2 MALOSSI MHR BLACK GRIPS (mod. with side fastening)

商品編號 6918649.B0

2 MALOSSI MHR BLACK GRIPS (mod. without side fastening)

商品編號 6918700.B0

2 MALOSSI MHR FLUO ORANGE GRIPS (mod. with side fastening)

商品編號 6918702.O0

2 MALOSSI MHR FLUO ORANGE GRIPS (mod. without side fastening)

商品編號 6918701.O0

2 MALOSSI MHR FLUO YELLOW GRIPS (mod. with side fastening)

商品編號 6918702.Y0

2 MALOSSI MHR FLUO YELLOW GRIPS (mod. without side fastening)

商品編號 6918701.Y0

2 WHITE GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. with side fastening)

商品編號 6914575.W0

2 WHITE GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. without side fastening)

商品編號 6914574.W0

2 BLACK GRIPS GAS Malossi (mod. with side fastening)

商品編號 6918091.B0

2 BLACK GRIPS GAS Malossi (mod. without side fastening)

商品編號 6918092.B0

2 BLACK GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. with side fastening)

商品編號 6914575.B0

2 BLACK GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. without side fastening)

商品編號 6914574.B0

2 BLACK GRIPS with RED Malossi logo (mod. with side fastening)

商品編號 6914060.R0

2 BLACK GRIPS with RED Malossi logo (mod. without side fastening)

商品編號 6914059.R0

2 BLACK GRIPS with YELLOW Malossi logo (mod. with side fastening)

商品編號 6914060.Y0

2 BLACK GRIPS with YELLOW Malossi logo (mod. without side fastening)

商品編號 6914059.Y0

2 MALOSSI MHR BLACK GRIPS (mod. with side fastening)

商品編號 6918649.B0

2 MALOSSI MHR BLACK GRIPS (mod. without side fastening)

商品編號 6918700.B0

2 MALOSSI MHR FLUO ORANGE GRIPS (mod. with side fastening)

商品編號 6918702.O0

2 MALOSSI MHR FLUO ORANGE GRIPS (mod. without side fastening)

商品編號 6918701.O0

2 MALOSSI MHR FLUO YELLOW GRIPS (mod. with side fastening)

商品編號 6918702.Y0

2 MALOSSI MHR FLUO YELLOW GRIPS (mod. without side fastening)

商品編號 6918701.Y0

2 WHITE GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. with side fastening)

商品編號 6914575.W0

2 WHITE GRIPS with Malossi TRIBAL logo (handle Ø 30 mod. without side fastening)

商品編號 6914574.W0

ROLLER CRANKCASE MHR PIAGGIO

商品編號 2514521

NOT to be used on VEHICLE WITH ORIGINAL PRIMARY GEARS

ROLLER CRANKCASE MHR TEAM PIAGGIO

商品編號 2514603

NOT to be used on VEHICLE WITH ORIGINAL PRIMARY GEARS

AIR FORCE cover/bolts Kit for Malossi C/RC-One CRANKCASE and Piaggio engines

商品編號 5717217

AIR FORCE cover/bolts Kit/starter Kit for Malossi C/RC-One CRANKCASE and Piaggio engines

商品編號 5717218

MHR C-one COMPL. ENGINE CRANKCASE (for PIAGGIO engine)

商品編號 5715844

To be assembled EXCLUSIVELY with Malossi CARB.KITS: 1611021.T PHBG 19 BS, OR with 1613890.T0 PHBG 21 BS, OR with 1616276 VHST 28 BS

MHR RC-one COMPL. ENGINE CRANKCASE (for PIAGGIO engine)

商品編號 5715845

To be assembled EXCLUSIVELY with: CRANKSHAFTS (stroke 44 mm) 5317822 (5316029 : out of production) AND CYLINDER KIT 3115883

ENERGY PUMP

商品編號 5616363

RAPID SENSE SYSTEM DUAL TEMP METER

商品編號 5817491B

RAPID SENSE SYSTEM RPM TEMP HOUR METER

商品編號 5817540B

2 ROLLER BEARINGS with BALLS Ø 20x52x10-12 (C3M) MHR for CRANKSH. autom. scooter PIAGGIO 50

商品編號 6614105EA

Carbonitrided inner ring , oversize balls and special reduced outer ring.

2 ROLLER BEARINGS with BALLS Ø 20x52x12 (C3M) SPORT for CRANKSH. autom. scooter PIAGGIO 50

商品編號 6614105E

STRENGTHENED for ROAD and RACING USE

OIL-SEAL Ø 18x28x7 mm FKM cranksh.

商品編號 66 9599B

OIL-SEAL SET FKM/PTFE cranksh. PIAGGIO scooter 50 2T autom.

商品編號 6618157

OIL-SEAL SET FKM/PTFE for OVERHAUL PIAGGIO scooter 50 2T autom.

商品編號 6615749

2 PLUGS for TYRE INNER TUBE VALVE

商品編號 4213415.B0

SPARK PLUG DENSO IRIDIUM IW 27 (thread M14 - 19 mm)

商品編號 6314455.L0

SPARK PLUG DENSO IRIDIUM IW 34 (thread M14 - 19 mm)

商品編號 6314455.S0

TO BE USE WITH MODULAR-HEAD cylinder kits

FKM TILTED INT.MANIF. Ø 21-24,5 L.26,5 (PIAGGIO-GILERA 2T 50)

商品編號 02 9732B

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

NBR TILTED INT.MANIF. Ø 20,5-23 L.26 (PIAGGIO-GILERA 2T 50)

商品編號 02 5733B

Original spare Ø 20 : for original air box filter

NBR TILTED INT.MANIF. Ø 22-28 L.26 (PIAGGIO-GILERA 2T 50)

商品編號 02 8480B

For original air box filter

NBR TILTED INT.MANIF. Ø 26-30 L.31,5 (PIAGGIO-GILERA 2T 50)

商品編號 02 7528B

Not suitable for original air box filter

RACING FKM TILTED INT.MANIF. Ø 22-28 L.26,5 (PIAGGIO-GILERA 2T 50)

商品編號 02 9441B

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

RACING NBR TILTED INT.MANIF. Ø 22-28 L.26,5 (PIAGGIO-GILERA 2T 50)

商品編號 02 8856B

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

BOLT/GASKETS KIT for MHR REPLICA/ART OF PERFORMANCE

商品編號 2012442

(spare part for Malossi exhausts sys. 3212437 - 3215167 : out of production)

X360 FKM INCLINED INT.MANIF. Ø 22-24,5 L.29 (PIAGGIO)

商品編號 2014520

Can be rotated of 360°

X360 FKM INCLINED INT.MANIF. Ø 30-35 L.29 (PIAGGIO)

商品編號 2013802

Can be rotated of 360°

X360 RACING FKM INCLINED INT.MANIF. Ø 22-28 L.29 (PIAGGIO)

商品編號 2014519

Can be rotated of 360° - for PHBG 15-21 Racing (linkage 28)

BOTTLE 7.1 2T OIL RACING Full Synt 1L for vehicles with separate lubrication

商品編號 76 8228B

BOTTLE 7.1 2T OIL SPORT Engine 1L for vehicles with separate lubrication

商品編號 76 8229B

BOTTLE 7.1 2T OIL TOP RACING Full Synt 1L

商品編號 7616710B

BOTTLE 7.1 RACING Gear Oil Full Synt (SAE 75W-90) 0.25L

商品編號 7613470B

BOTTLE 7.1 SPORT Gear Oil (SAE 80W-90) 0.25L

商品編號 7613468B

BOTTLE 7.1 SPORT Brake Fluid (DOT 4) 0.25L

商品編號 7613464B

6 VL11/ORIG.VAL. CARB.f. PETALS 2 th.0,30/0,35/0,40

商品編號 27 7054.C0

for ORIGINAL VALVE

REED VALVE VL11 CARB.petal th.0,30

商品編號 27 7708.C0

REED VALVE VL13 CARB.petal th.0,30 (45°) MHR

商品編號 27 9490.C0

REED VALVE VL16 CARB.petal th.0,30 MHR TEAM

商品編號 2713719.C0

for the ASSEMBLY MODIFY the CRANKCASE