The product has been added to your cart   Go to cart

The product has been added to your wishlist   Go to your wishlist

ALUM-COMPL.CYL. Ø 63 pin Ø 14 I-TECH 4-stroke

pour VESPA GTS 3V 125 ie 4T

3116669

€ 647.15
-10%
€ 582.44

 

The product is AVAILABLE

Description

Complete cylinders I-TECH 4 STROKE

Piaggio / Vespa 125-150 4T

The new complete cylinders equipped with CDI!

Force Master is the innovative CDI which allows to change the injection in order to fit perfectly the new Malossi 4-stroke cylinder kit. This CDI has been scheduled with different maps so as to be coupled perfectly with your vehicle whatever its setting is!

 

Complete cylinder I-TECH 4 STROKE

  • Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel die and crossed smoothing with two diamond passages with very limited tolerances.
  • Machining: on machine tools with high precision numerical control.
  • Cylinder-piston connection with an allowance of 0.05 mm.
  • Recalculated and upgraded heat exchange surfaces.

CDI Force Master

  • Carburation adjusting
  • ± 20% at min/medium/max
  • RPM limiter : + 1000 RPM (only for Code 3116669)
  • 4 different maps

Piston

  • Ultra compact with 3 rings.
  • Material: special aluminium alloy with high silicon content, low thermal expansion and a tin facing on the sliding surfaces.
  • Machining on machine tools with numerical control.
  • Lightened and reinforced.
  • Upgraded heat exchange surfaces.

Piston rings

  • Special rings with high sliding ease and very high mechanical resistance.
  • I° ring compression in nitrided and chromium steel.
  • II° special cast iron ring.
  • Three piece scraper ring made of chromiumplated special steel alloy.

 

Technical features

Cylinder+CDI

Bore Ø

Stroke mm

Displacement cc

Compression ratio

CDI

MAPS

3116550

63

58.6

182.67

1:11.15

5516549

0 - 125cc with kit Malossi ø63 + Original exhaust system

1 - 125cc with kit Malossi ø63 + Malossi exhaust system with db killer

2 - 150cc with kit Malossi ø63 + Original exhaust system

3 - 150cc with kit Malossi ø63 + Malossi exhaust system with db killer

3116669

63

58.6 182.67

1:11.15

5516670

0 - 125cc with kit Malossi ø63 + Original exhaust system

1 - 125cc with kit Malossi ø63 + Malossi exhaust system with db killer

2 - 150cc with kit Malossi ø63 + Original exhaust system

3 - 150cc with kit Malossi ø63 + Malossi exhaust system with db killer

 

Table of applications

The models listed in the chart here below may have a different THROTTLE BODY, depending on the year of production/ country where they are sold. Thus, they need a special cylinder equipped with cdi. When placing your order, please check the following identification numbers: country, frame number and engine number.

In case of countries which are not mentioned into below chart, you'll have to check the origin of the vehicle.

Products reserved exclusively for competitions in places intended for them in accordance with the provisions of the competent sports authorities. We Disclaim all liability for improper use

適用車型

ALUM-COMPL.CYL. Ø 63 pin Ø 14 I-TECH 4-stroke

Make Model
PIAGGIO PIAGGIO NEW FLY 3V 125 ie 4T euro 3 2012->
PIAGGIO PIAGGIO LIBERTY 3V 125 ie 4T euro 3
ONLY for vehicles WITH cdi integrated into the throttle body
PIAGGIO PIAGGIO LIBERTY 3V 150 ie 4T euro 3 (M738M)
ONLY for vehicles WITH cdi integrated into the throttle body
VESPA VESPA 946 3V ABS 125 ie 4T (M801M)
VESPA VESPA GTS 3V 125 ie 4T
VESPA VESPA GTS 3V 150 ie 4T
VESPA VESPA LT 3V 125 ie 4T euro 3
VESPA VESPA LT 3V 150 ie 4T euro 3
VESPA VESPA LX 3V 125 ie 4T euro 3 2012-> (M687M)
ONLY for vehicles WITH cdi integrated into the throttle body
VESPA VESPA LX 3V 150 ie 4T euro 3 2012-> (M688M)
ONLY for vehicles WITH cdi integrated into the throttle body
VESPA VESPA LXV 3V 125 ie 4T euro 3 2013->
ONLY for vehicles WITH cdi integrated into the throttle body
VESPA VESPA Primavera 3V 125 ie 4T euro 3 2014-> (M811M)
ONLY for vehicles WITH cdi integrated into the throttle body
VESPA VESPA Primavera 3V 150 ie 4T euro 3 2014-> (M812M)
ONLY for vehicles WITH cdi integrated into the throttle body
VESPA VESPA S 3V 125 ie 4T euro 3 2012->