這產品已經加入您的購物車   購物車

這產品已新增至 最愛商品清單   最愛商品清單

RACING NBR TILTED INT.MANIF. Ø 22-28 L.26,5 (PIAGGIO-GILERA 2T 50)

適用於 PIAGGIO ZIP 50 2T <-1999

02 8856B

€ 64.05

 

現有庫存量 : 充足
NOTE: Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

商品說明

INTAKE MANIFOLDS

Intake manifold conveys the air-fuel mixture to the engine by means of reed valve.

The total efficiency of an engine is calculated as the product of various partial efficiencies, such as:
- volumetric efficiency
- thermodynamic efficiency
- mechanical efficiency

Volumetric efficiency is the ratio between the quantity of fuel that can enter the combustion chamber and the displacement of the engine.

One of the main factors affecting volumetric efficiency is loss due to friction that the fluid encounters (air-fuel mix) when feeding from the air filter to the combustion chamber. Therefore, one of the components that greatly influences this loss is the intake manifold, since all of the mix has to travel through it with the minimum possible loss . For this reason, sudden increases in section and corners along the mix path must absolutely be avoided.
The intake manifold also acts as an accumulation tank for the fresh load , since the mix, travelling at a certain speed, requires time to stop when the reed valve closes. Therefore, mix collects in the manifold and exerts pressure against the reeds. For this reason, each manifold has a well-defined range of revolutions within which it provided maximum efficiency (tuned manifold).
In addition, the manifold supports the carburettor by connecting it to the engine casing or to the cylinder , damping vibrations between casing and carburettor and preventing emulsion of gas and air in the carburettor tank.
This apparently simple component therefore requires a great deal of study in order to take full advantage of all of its qualities.
Malossi engineers have achieved this to perfection. Malossi, with decades of experience in engine fuelling systems, has created a new line of manifolds in rubber and aluminium alloy for the new generation of scooters, and has tested and developed the line on roads and race tracks.
Malossi rubber manifolds feature a composite structure. Their construction begins with an aluminium insert that is encased in a special plastic material that is impervious to oils and fuels, guaranteeing increased rigidity at the point of attachment to the casing and greater flexibility of the manifold body.

 

ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic.

 

Piaggio - Gilera 2T 50 engines

APRILIA - DERBI - GILERA - ITALJET - PIAGGIO

Material

INTER-AXIS mm

Ø hole

Ø manifolds

Ø inlet

total length

carburettors applications

Note

02 8732B

NBR

52

6,5

21 24,5 26,5

PHBG 15-21

Not suitable for original air box filter

02 8856B

NBR

52

6,5

22 28 26,5

PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter

02 9441B

viton

52

6,5

22 28 26,5

PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter

02 9732B

viton

52

6,5

21 24,5 26,5

PHBG 15-21

 Not suitable for original air box filter

 

 Yamaha - MBK - Minarelli horizontal 2t 50 engines

APRILIA - BENELLI - BETA - CPI - EXPLORER -

HUPPER - ITALJET - MALAGUTI - MBK - YAMAHA

Material

Ø hole

Ø manifolds

Ø inlet

total length

carburettors applications

Note

02 8857B

NBR

6,7

22 28 29

PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter

0213222B

NBR

6,7

22 24,5 29

PHBG 15-21 Racing

Not suitable for original air box filter

0213661B

viton

6,7

22 24,5 29

PHBG 15-21 Racing

Not suitable for original air box filter

0213662B

viton

6,7

22 28 29  PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter

 

 


本產品僅供競賽或提升車輛性能用途使用,在您車輛按裝產品前,請諮詢您所在地區的相關法規,以確保符合所有當地適用法規。

適用車型

RACING NBR TILTED INT.MANIF. Ø 22-28 L.26,5 (PIAGGIO-GILERA 2T 50)

廠牌 車型
APRILIA 艾普利亞 APRILIA MOJITO CUSTOM 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SCARABEO CLASSIC 50 2T euro 4 2018-> (CA91M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SCARABEO STREET 50 2T (PIAGGIO)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SCARABEO STREET 50 2T euro 4 2018-> (CA91M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SPORTCITY ONE STREET 50 2T euro 2
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SR (carb.) 50 2T LC 2004-> (PIAGGIO)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SR R 50 2T LC euro 4 2018-> (PIAGGIO CA81M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SR MOTARD 50 2T euro 2
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SR MOTARD 50 2T euro 4 2018-> (CA41M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SR R (carb.) 50 2T LC (PIAGGIO)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA 艾普利亞 APRILIA SR Street 50 2T LC euro 2
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI 德比 DERBI ATLANTIS - BULLET 50 2T 2003->
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI 德比 DERBI GP1 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI 德比 DERBI GP1 OPEN 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI 德比 DERBI GP1 REVOLUTION 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI 德比 DERBI VARIANT Sport 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA DNA 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA EASY MOVING 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA ICE 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA RUNNER SP 50 2T LC <-2005
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA RUNNER SP 50 2T LC 2006-> (C451M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA RUNNER FX 125 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA RUNNER FXR - SP 180 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA RUNNER 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA STORM 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA STALKER 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA TYPHOON 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA 吉雷拉 GILERA TYPHOON X 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
ITALJET 意塔杰特 ITALJET JET SET 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
ITALJET 意塔杰特 ITALJET TORPEDO 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG Power 50 2T LC euro 4 2018-> (CA71M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO DIESIS 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG EXTREME 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG EXTREME 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO FLY 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO FREE 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO LIBERTY 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG MC2 50 2T LC <-1997
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG MC2 50 2T LC 1998->
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG MC3 DT 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG MC3 DD 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NTT 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG Power DD 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO NRG Power DT 50 2T (C453M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO QUARTZ 50 2T LC
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO SFERA RESTYLING 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO SFERA 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO SFERA 75 - 80 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO TYPHOON 50 2T 2007->2010
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO TYPHOON 50 2T euro 2 2011->2017 (C421M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO TYPHOON 50 2T euro 4 2018-> (CA41M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO ZIP Fast Rider 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO ZIP 50 2T 2000->
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO ZIP 50 2T <-1999
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO ZIP SP 50 2T LC 2001->
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO 比亞喬 PIAGGIO ZIP SP 50 2T LC <-2000
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA 偉士牌 VESPA ET2 50 2T 2000->
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA 偉士牌 VESPA ET2 50 2T <-1999
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA 偉士牌 VESPA LX 50 2T
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA 偉士牌 VESPA Primavera 50 2T euro 2 (C533M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA 偉士牌 VESPA S 50 2T euro 2 (C381M)
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA 偉士牌 VESPA Sprint 50 2T euro 2
Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic